学年

教科

質問の種類

看護 大学生・専門学校生・社会人

お願いします

成人看護/呼吸器疾患患者の看護 使い方は若頭を ご覧ください。 主な症状と看護 咳嗽には、喀痰を伴う_ 呼吸困難(息切れ)を客観的に表現するのには 修正 Medical Research Council (mMRC) 息切れスケールが用いられる。 性咳嗽と、喀痰を伴わない性咳嗽がある。 の分類や。 比べ MOTOAL GOOD 修正 Medical Research Council (mMRC) 息切れスケールは,グレード に分類されている。 激しい運動をしたときだけ息切れがあるのは、グレード TOTOA (69) である。 合 位など, 呼吸しやすい 呼吸困難時や咳嗽時は にする。 位, 間奮呼吸困難のある患者には、環境を整えたり、声かけやタッチングをしたりなど 面への配慮も行う。 換気障害は、 性換気障害 (8性換気障害, 混合性換気障害に分類さ れる。 34 喀血時,出血部位が判明している場合は, を下とする側臥位を基本とし、 への血液の流入を防止する。 SREST (8mm) no 喀血による失血は (106) 代表復血潮 _低下など組織循環に影響を及ぼすため、バイタルサイン の変化に注意する。 素沈工高の増 チアノーゼは、還元ヘモグロビンの量が _g/dLを超えると生じる。 101 高度の低酸素血症では, 性チアノーゼが出現する。 AWERS (1991) 肺疾患の検査と看護 後口腔 口腔内を十分に洗浄 してから行う。 喀痰細胞診検査は,肺がんなどの検出に有用である。 スパイロメーター(スパイロメトリー)による量(VC)は、年齢・性別・身 長から求めた予測値との比で評価する。 スパイロメトリーによる%肺活量が80%未満の場合に 判断される。 性換気障害があると 人 秒率が70%未満であれば (換気障があると判断される。 Kanonbaku Kango Geluss de

回答募集中 回答数: 0
TOEIC・英語 大学生・専門学校生・社会人

英語の問題です。 教えて欲しいです🙇‍♀️

(2) I had my teeth 1 check 1( )に入る最も適切な語句を ① ~ ④から選びなさい。 (1) He went on speaking as if she ( 1 can't 2 hasn't ) there. Son 3 wouldn't ) by a dentist this morning. ult niles 3 checking wahiwon (青山学院大 ) ④weren't pomibinand (岩手医科大) 24 to check 2 checked (3) You should not keep any pets ( 1 after 2 unless ) you can take good care of them. 3 when (中央大) ④which 1 as 2 in ) all be correct. ②anytime (6) If the weather ( ①must have been (4) This town will change ( ) another ten years. (5) Those may not ( 1 absolute ) fine yesterday, I would have done the laundry. 2 is (7) Studying takes up a lot of my time during the week, ( ) little time for hobbies. (芝浦工業大) since 3 of (國學院大) 3 everything ④necessarily (関西学院大 ) ③ wasn't 4 had been (皇學館大) ①1 has left (8) Have you heard the rumors ( 1 that 2 what leaves leaving 4 left ) Susan has returned to this town? ③ which (麗澤大) ④ who 1 by (9) What was found in this experiment is ( 2 for (10)( ) what to say, she remained silent. ) great importance to researchers. 3 in (立命館大) 4 of (愛知工業大) 1 Not knowing 2 Being not knowing ③No knowing ④Knowing no (11) I tried to ( 1 have 2 make ) her to tell me what happened last night. 3 get (十文字学園女子大) 4 let How gimon and (12) Do what you like, as ( 1 far 2 much B in 1 in 2 with bnat am ) as you leave me alone. 3 long (13) This tool is dangerous. Please read the instructions ( (14) If I hadn't drunk so much last night, I ( 1 feel (15) I wish you 1 attend (16) If I ( 1 were ) 2 will feel ) the party yesterday. 2 were attending ) much better than I do right now. ③ would feel ③ have attended (中京大) 4 would have felt (目白大) ④had attended ) in your situation, I would be more careful about what you post on social media. (フェリス女学院大) 4 many ) care. (聖隷クリストファー大) at ④take gwol 3 will be (南山大) ④would be

回答募集中 回答数: 0
TOEIC・英語 大学生・専門学校生・社会人

文章を読んで上の1〜4の問題を解くものです。 分からないのでお願いします

3. Answer the following questions. 1 What is the difference between UNIX and Linux? 2 3 4 Choose one of the words in italics in the text. What is the definition of the word you have chosen? What are the three levels of a Linux system? What are the two main functions of the kernel? [Reading Text] UNIX was initially developed by researchers at Bell Labs in the 1970s. Today, UNIX and its variants are widely used mainly on servers. By far, the most well- known UNIX-like operating system is Linux. Linux is available in different distributions which include the Linux kernel and different collections of software. These distributions have various user interfaces, many experienced users preferring the command-line interface, or shell. Linux distributions include a range of software including text editors. memory. While the mechanics of Linux and other Unix operating systems are complicated, the components of a Linux system can be grouped into three levels. The lowest level is the hardware, such as Central Processing Unit (CPU) and The next level is the kernel. It enables communication between hardware and software, by providing instructions to the CPU and other hardware. The programs that are running on the system, or processes, make up the top level known as the user space. Processes in user space generally only have access to a restricted amount of memory and operations, this is called user mode. The kernel runs in kernel mode which allows it unrestricted access to hardware resources. The kernel provides functions such as process management and memory management. A computer only has limited Random Access Memory (RAM) and processor cores. Process management allows the system to run multiple programs (processes) at the same time even if the CPU can only execute only a few processes at a time. Memory management allows applications to share the system's memory while avoiding potential issues such as memory leak. Included with the kernel are device drivers that provide an interface for applications to communicate with hardware, such as hard drives. System calls allow user processes to access features that are executed at kernel mode, for example creating new processes.

回答募集中 回答数: 0
TOEIC・英語 大学生・専門学校生・社会人

この1〜4の問題お願いします🙏🏼🙏🏼

3. Answer the following questions. 1 What is the difference between UNIX and Linux? 2 3 4 Choose one of the words in italics in the text. What is the definition of the word you have chosen? What are the three levels of a Linux system? What are the two main functions of the kernel? [Reading Text] UNIX was initially developed by researchers at Bell Labs in the 1970s. Today, UNIX and its variants are widely used mainly on servers. By far, the most well- known UNIX-like operating system is Linux. Linux is available in different distributions which include the Linux kernel and different collections of software. These distributions have various user interfaces, many experienced users preferring the command-line interface, or shell. Linux distributions include a range of software including text editors. memory. While the mechanics of Linux and other Unix operating systems are complicated, the components of a Linux system can be grouped into three levels. The lowest level is the hardware, such as Central Processing Unit (CPU) and The next level is the kernel. It enables communication between hardware and software, by providing instructions to the CPU and other hardware. The programs that are running on the system, or processes, make up the top level known as the user space. Processes in user space generally only have access to a restricted amount of memory and operations, this is called user mode. The kernel runs in kernel mode which allows it unrestricted access to hardware resources. The kernel provides functions such as process management and memory management. A computer only has limited Random Access Memory (RAM) and processor cores. Process management allows the system to run multiple programs (processes) at the same time even if the CPU can only execute only a few processes at a time. Memory management allows applications to share the system's memory while avoiding potential issues such as memory leak. Included with the kernel are device drivers that provide an interface for applications to communicate with hardware, such as hard drives. System calls allow user processes to access features that are executed at kernel mode, for example creating new processes.

回答募集中 回答数: 0
TOEIC・英語 大学生・専門学校生・社会人

英読解の問題です。 すっかり忘れてしまったため何も分かりません。 2問教えて欲しいです。お願いします><

2022 P=HT 6. 次のお知らせを読み、 (1) ~ (2) のA~Dで適切なものに○をつけなさい。 [4×2=8] TO: All staff From: Erin Liner, Manager Date: July 15 Subject: Our survey Dear all. We have finished reviewing the data which we received from the recent customer satisfaction survey. I would like to share the most important findings, and how we can improve on certain areas of our work. Overall, customers were happy with the quality of our service. the helpfulness of our staff, and the range of products we offer. However, there were some negative comments which we can begin to work on. A common complaint was that there are not enough foreign titles in the store, especially Japanese comics. I will ask John Calman to research some of the most popular series and make sure we start carrying them from the fall. As Gita Pradesh spent her college years in Tokyo, I will ask her to assist. Better signage was another thing which people wanted. They spend a lot of time looking for the right section and it frustrates a lot of customers. This is something we can improve immediately, so I will speak to Alice Moore today about making the signs easier to see, and adding more if necessary. Finally, we got some comments about having a small cafe in the store. Nowadays, people want to have a coffee while reading or browsing, and it could be a new source of profit. Mario Venetti will make a report on the feasibility and deliver it next month. Thank you for all your efforts in making us the best we can be. Erin Liner Manager (1) What is the purpose of the e-mail? (A) To ask staff to create survey questions (B) To share details of customer feedback (C) To inform staff of recent changes (D) To invite staff to apply for new positions (2) Where does Ms. Liner most likely work? (A) At a café (B) At a movie theater (C) At a clothing shop (D) At a bookstore 以

回答募集中 回答数: 0
数学 大学生・専門学校生・社会人

統計学の知識ある方、以下にある式の導出方法分かりやすく教えていただきたいです。 分かるところだけでも教えてくれると嬉しいです😭 ちなみにこのサイトは、 統計学入門 http://www.snap-tck.com/room04/c01/stat/stat0001.html こ... 続きを読む

19:56 1 allệ (注3) 相関分析と同様に回帰分析の場合も信頼区間を求めることができま す。まずyの推測値の信頼区間は次のようになります。 この信頼区間は母集 団のy推測値の100(1-α) % が含まれる範囲を表し、信頼限界と呼ぶことが多 いようです。 y=a+b=(my-bmx)+bx = my+b(z-mz)→(j-my)=b(x-mz) VR VR V(j-my) = V(j)+V(my)-2C(j,my) = V(g) + -2 = V(y) - VR =V n n n =V(b(z-mx))=(x-m²) 2V(b)=(x-m²) 2VR S エエ (x - ₂)² 2V (6) - Vx{1+ (².²} =VR n S x=X0の時のy推測値の100(1-α)% 信頼限界: U Dol=a+bro ±t(n-2,a) VR -2,0)√| V₁ { 1/2 + ( 2 = m₂) ² } n S エ mx:xの標本平均 Sxx:xの平方和 VR : 残差分散 VR C(jj,my) = y推定値とmyの共分散 t(n-2, α): 自由度(n-2)のt n 分布における100α%点 この100(1-α)% 信頼限界において、x=mxの時の値を計算すると次のように なります。 VR ŷOL =a+bm±t(n-2,0) VR・ -2,0) √/ VR { 1 1 1 + (m₂ - m₂)² S エエ 2²}. =my±t(n-2,a)V n n これは値と残差分散が少し異なるだけで、 平均値の信頼限界(信頼区間) とほ ぼ同じ式であることがわかると思います。 つまり回帰直線は平均値を2次元 に拡張したものに相当し、 y推測値の信頼限界は平均値の信頼限界を2次元に 拡張したものに相当することになります。 次にyの信頼限界を求めてみましょう。 もしaとbに誤差がない、つまりy推 測値に誤差がないとすると次のようになります。 これが許容限界になりま す。 V(g) = V(g+c)=V(e) =VR x=x0の時のyの100(1-α) % 許容限界: gol =a+bro ±t(n-2,a)VVR you x=mxの時: gol = my±t(n-2,a) VVR しかし実際にはaとbには誤差があるので次のようになります。 これが棄却 限界です。 回帰分析の場合は棄却限界のことを予測限界 (prediction limit)と 呼びます。 (x-²)) S エ n n SII V(g+c)=V(g)+V(c) +2C(j,c)=VR /R { 1 + (*² =− m ₂) ² } + V₁ + 0 = VR { 1 + 1 2 + ( x − m ₂ )² ]} x=X0の時のyの100(1-α) % 予測限界: 1 (x-m₂)² yoz=a+bro ±t(n-2.0)/VR =t(n-2,α) √ -2,0) √/V₁ { 1 + 1 + n S エ U x=mxの時: yol = my ±t(n-2,a) 2, a) √/ VR (1+1) VR (1+ 安全ではありません - snap-tck.com

回答募集中 回答数: 0
1/4